1 s s ss subminiature basic switch subminiature basic switch offers high reliability and security the omron's best-selling micro switches of a wide variety from 0.1a to 10.1a. a variety of models are available, with operating force ranging from low to high. two split springs ensure a high stability and durability of 30,000,000 operations. rohs compliant model number legend list of models standard models ss- @@@@@@ 1. ratings 10 : 250 vac 10.1a 5 : 125 vac 5 a 01 : 30 vdc 0.1a 2. actuator none : pin plunger gl : hinge lever gl111 : long hinge lever gl13 : simulated roller lever gl2 : hinge roller lever gl02 : hinge roller lever (roller material: stainless) heat-resistant 3. maximum operating force (of) none : 1.47 n {150 gf} -f : 0.49 n {50 gf} (0.1 a, 5 a) -e : 0.25 n {25 gf} (0.1 a) 123456 4. contact form none : spdt -2 : spst-nc -3 : spst-no 5. terminals none : solder terminals t : quick-connect terminals (#110) d : pcb terminals 6. heat resistance none : standard (85c) -t : heat-resistant (120c) note. these values are for the pin plunger models. separator (sold separately), terminal co nnector (sold separately) refer to " basic switch common accessories " ratings 10.1 a 5 a 0.1 a actuator terminals contact form maximum operating force (of) pin plunger solder terminals spdt 1.47 n {150 gf} ss-10 ss-5 ss-01 spst-nc ss-10-2 ss-5-2 ss-01-2 spst-no ss-10-3 ss-5-3 ss-01-3 quick-connect terminals (#110) spdt ss-10t ss-5t ss-01t spst-nc ss-10-2t ss-5-2t ss-01-2t spst-no ss-10-3t ss-5-3t ss-01-3t pcb terminals spdt ss-10d ss-5d ss-01d spst-nc ss-10-2d ss-5-2d ss-01-2d spst-no ss-10-3d ss-5-3d ss-01-3d solder terminals spdt 0.49 n {50 gf} - SS-5-F ss-01-f spst-nc - SS-5-F-2 ss-01-f-2 spst-no - SS-5-F-3 ss-01-f-3 quick-connect terminals (#110) spdt - SS-5-Ft ss-01-ft spst-nc - SS-5-F-2t ss-01-f-2t spst-no - SS-5-F-3t ss-01-f-3t pcb terminals spdt - SS-5-Fd ss-01-fd spst-nc - SS-5-F-2d ss-01-f-2d spst-no - SS-5-F-3d ss-01-f-3d solder terminals spdt 0.25 n {25 gf} --ss-01-e spst-nc - - ss-01-e-2 spst-no - - ss-01-e-3 quick-connect terminals (#110) spdt --ss-01-et spst-nc - - ss-01-e-2t spst-no - - ss-01-e-3t pcb terminals spdt --ss-01-ed spst-nc - - ss-01-e-2d spst-no - - ss-01-e-3d
2 ss subminiature basic switch s s ratings 10.1 a 5 a 0.1 a actuator terminals contact form maximum operating force (of) hinge lever solder terminals spdt 0.49 n {50 gf} ss-10gl ss-5gl ss-01gl spst-nc ss-10gl-2 ss-5gl-2 ss-01gl-2 spst-no ss-10gl-3 ss-5gl-3 ss-01gl-3 quick-connect terminals (#110) spdt ss-10glt ss-5glt ss-01glt spst-nc ss-10gl-2t ss-5gl-2t ss-01gl-2t spst-no ss-10gl-3t ss-5gl-3t ss-01gl-3t pcb terminals spdt ss-10gld ss-5gld ss-01gld spst-nc ss-10gl-2d ss-5gl-2d ss-01gl-2d spst-no ss-10gl-3d ss-5gl-3d ss-01gl-3d solder terminals spdt 0.16 n {16 gf} - ss-5gl-f ss-01gl-f spst-nc - ss-5gl-f-2 ss-01gl-f-2 spst-no - ss-5gl-f-3 ss-01gl-f-3 quick-connect terminals (#110) spdt - ss-5gl-ft ss-01gl-ft spst-nc - ss-5gl-f-2t ss-01gl-f-2t spst-no - ss-5gl-f-3t ss-01gl-f-3t pcb terminals spdt - ss-5gl-fd ss-01gl-fd spst-nc - ss-5gl-f-2d ss-01gl-f-2d spst-no - ss-5gl-f-3d ss-01gl-f-3d solder terminals spdt 0.08 n {8 gf} - - ss-01gl-e spst-nc - - ss-01gl-e-2 spst-no - - ss-01gl-e-3 quick-connect terminals (#110) spdt - - ss-01gl-et spst-nc - - ss-01gl-e-2t spst-no - - ss-01gl-e-3t pcb terminals spdt - - ss-01gl-ed spst-nc - - ss-01gl-e-2d spst-no - - ss-01gl-e-3d long hinge lever solder terminals spdt 0.39 n {40 gf} ss-10gl111 ss-5gl111 ss-01gl111 spst-nc ss-10gl111-2 ss-5gl111-2 ss-01gl111-2 spst-no ss-10gl111-3 ss-5gl111-3 ss-01gl111-3 quick-connect terminals (#110) spdt ss-10gl111t ss-5gl111t ss-01gl111t spst-nc ss-10gl111-2t ss-5gl111-2t ss-01gl111-2t spst-no ss-10gl111-3t ss-5gl111-3t ss-01gl111-3t pcb terminals spdt ss-10gl111d ss-5gl111d ss-01gl111d spst-nc ss-10gl111-2d ss-5gl111-2d ss-01gl111-2d spst-no ss-10gl111-3d ss-5gl111-3d ss-01gl111-3d solder terminals spdt 0.12 n {12 gf} - ss-5gl111-f ss-01gl111-f spst-nc - ss-5gl111-f-2 ss-01gl111-f-2 spst-no - ss-5gl111-f-3 ss-01gl111-f-3 quick-connect terminals (#110) spdt - ss-5gl111-ft ss-01gl111-ft spst-nc - ss-5gl111-f-2t ss-01gl111-f-2t spst-no - ss-5gl111-f-3t ss-01gl111-f-3t pcb terminals spdt - ss-5gl111-fd ss-01gl111fd spst-nc - ss-5gl111-f-2d ss-01gl111-f-2d spst-no - ss-5gl111-f-3d ss-01gl111-f-3d solder terminals spdt 0.06 n {6 gf} - - ss-01gl111-e spst-nc - - ss-01gl111-e-2 spst-no - - ss-01gl111-e-3 quick-connect terminals (#110) spdt - - ss-01gl111-et spst-nc - - ss-01gl111-e-2t spst-no - - ss-01gl111-e-3t pcb terminals spdt - - ss-01gl111-ed spst-nc - - ss-01gl111-e-2d spst-no - - ss-01gl111-e-3d simulated roller lever solder terminals spdt 0.49 n {50 gf} ss-10gl13 ss-5gl13 ss-01gl13 spst-nc ss-10gl13-2 ss-5gl13-2 ss-01gl13-2 spst-no ss-10gl13-3 ss-5gl13-3 ss-01gl13-3 quick-connect terminals (#110) spdt ss-10gl13t ss-5gl13t ss-01gl13t spst-nc ss-10gl13-2t ss-5gl13-2t ss-01gl13-2t spst-no ss-10gl13-3t ss-5gl13-3t ss-01gl13-3t pcb terminals spdt ss-10gl13d ss-5gl13d ss-01gl13d spst-nc ss-10gl13-2d ss-5gl13-2d ss-01gl13-2d spst-no ss-10gl13-3d ss-5gl13-3d ss-01gl13-3d solder terminals spdt 0.16 n {16 gf} - ss-5gl13-f ss-01gl13-f spst-nc - ss-5gl13-f-2 ss-01gl13-f-2 spst-no - ss-5gl13-f-3 ss-01gl13-f-3 quick-connect terminals (#110) spdt - ss-5gl13-ft ss-01gl13-ft spst-nc - ss-5gl13-f-2t ss-01gl13-f-2t spst-no - ss-5gl13-f-3t ss-01gl13-f-3t pcb terminals spdt - ss-5gl13-fd ss-01gl13-fd spst-nc - ss-5gl13-f-2d ss-01gl13-f-2d spst-no - ss-5gl13-f-3d ss-01gl13-f-3d solder terminals spdt 0.08 n {8 gf} - - ss-01gl13-e spst-nc - - ss-01gl13-e-2 spst-no - - ss-01gl13-e-3 quick-connect terminals (#110) spdt - - ss-01gl13-et spst-nc - - ss-01gl13-e-2t spst-no - - ss-01gl13-e-3t pcb terminals spdt - - ss-01gl13-ed spst-nc - - ss-01gl13-e-2d spst-no - - ss-01gl13-e-3d separator (sold separately), terminal connector (sold separately) refer to "basic switch common accessories"
3 ss subminiature basic switch s s heat resistant models contact form contact specifications * please refer to " using micro loads " in " precautions " for more information on the minimum applicable load. ratings 10.1 a 5 a 0.1 a actuator terminals contact form maximum operating force (of) hinge roller lever solder terminals spdt 0.49 n {50 gf} ss-10gl2 ss-5gl2 ss-01gl2 spst-nc ss-10gl2-2 ss-5gl2-2 ss-01gl2-2 spst-no ss-10gl2-3 ss-5gl2-3 ss-01gl2-3 quick-connect terminals (#110) spdt ss-10gl2t ss-5gl2t ss-01gl2t spst-nc ss-10gl2-2t ss-5gl2-2t ss-01gl2-2t spst-no ss-10gl2-3t ss-5gl2-3t ss-01gl2-3t pcb terminals spdt ss-10gl2d ss-5gl2d ss-01gl2d spst-nc ss-10gl2-2d ss-5gl2-2d ss-01gl2-2d spst-no ss-10gl2-3d ss-5gl2-3d ss-01gl2-3d solder terminals spdt 0.16 n {16 gf} - ss-5gl2-f ss-01gl2-f spst-nc - ss-5gl2-f-2 ss-01gl2-f-2 spst-no - ss-5gl2-f-3 ss-01gl2-f-3 quick-connect terminals (#110) spdt - ss-5gl2-ft ss-01gl2-ft spst-nc - ss-5gl2-f-2t ss-01gl2-f-2t spst-no - ss-5gl2-f-3t ss-01gl2-f-3t pcb terminals spdt - ss-5gl2-fd ss-01gl2-fd spst-nc - ss-5gl2-f-2d ss-01gl2-f-2d spst-no - ss-5gl2-f-3d ss-01gl2-f-3d solder terminals spdt 0.08 n {8 gf} - - ss-01gl2-e spst-nc - - ss-01gl2-e-2 spst-no - - ss-01gl2-e-3 quick-connect terminals (#110) spdt - - ss-01gl2-et spst-nc - - ss-01gl2-e-2t spst-no - - ss-01gl2-e-3t pcb terminals spdt - - ss-01gl2-ed spst-nc - - ss-01gl2-e-2d spst-no - - ss-01gl2-e-3d ratings 10.1 a 5 a 0.1 a actuator terminals contact form maximum operating force (of) pin plunger solder terminals spdt 1.47 n {150 gf} ss-10-t ss-5-t ss-01-t quick-connect terminals (#110) ss-10t-t ss-5t-t ss-01t-t pcb terminals ss-10d-t ss-5d-t ss-01d-t hinge lever solder terminals 0.49 n {50 gf} ss-10gl-t ss-5gl-t ss-01gl-t quick-connect terminals (#110) ss-10glt-t ss-5glt-t ss-01glt-t pcb terminals ss-10gld-t ss-5gld-t ss-01gld-t long hinge lever solder terminals 0.39 n {40 gf} ss-10gl111-t ss-5gl111-t ss-01gl111-t quick-connect terminals (#110) ss-10gl111t-t ss-5gl111t-t ss-01gl111t-t pcb terminals ss-10gl111d-t ss-5gl111d-t ss-01gl111d-t simulated roller lever solder terminals 0.49 n {50 gf} ss-10gl13-t ss-5gl13-t ss-01gl13-t quick-connect terminals (#110) ss-10gl13t-t ss-5gl13t-t ss-01gl13t-t pcb terminals ss-10gl13d-t ss-5gl13d-t ss-01gl13d-t hinge roller lever (roller material: stainless steel) solder terminals 0.49 n {50 gf} ss-10gl02-t ss-5gl02-t ss-01gl02-t quick-connect terminals (#110) ss-10gl02t-t ss-5gl02t-t ss-01gl02t-t pcb terminals ss-10gl02d-t ss-5gl02d-t ss-01gl02d-t spdt spst-nc spst-no com no nc com nc com no item model ss-10 models ss-5 models ss-01 models contact specification rivet crossbar material silver alloy silver gold alloy gap (standard value) 0.5 mm 0.25 mm inrush current nc 20 a max. 1 a max. no 15 a max. 10 a max. 1 a max. minimum applicable load (reference value)* 5 vdc 160 ma 5 vdc 1 ma separator (sold separately), terminal co nnector (sold separately) refer to " basic switch common accessories "
4 ss subminiature basic switch s s terminals/appearances (unit: mm) mounting holes (unit: mm) characteristics note. the data given above are initial values. *1. the values for dielectric strength shown are for models with a separator (refer to " micro switch common accessories "). *2. the values are at free position and total travel position values for pin plunger, and total travel position value for lever. close or open circuit of the contact is 1ms max. *3. for testing conditions, consult your omron sales representative. item model ss-10 models ss-5 models ss-01 models permissible operating speed 0.1 mm to 1 m/s (for pin plunger models) permissible operating frequency mechanical 400 operations/min electrical 60 operations/min insulation resistance 100 m min. (at 500 vdc with insulation tester) contact resistance (initial value) of 1.47 n models 30 m max. 50 m max. of 0.49 n models - 50 m max. 100 m max. of 0.25 n models - 150 m max. dielectric strength *1 between terminals of the same polarity 1,000 vac 50/60 hz for 1 min 600 vac 50/60 hz for 1 min between current-carrying metal parts and ground 1,500 vac 50/60 hz for 1 min between each terminals and non- current-carrying metal parts 1,500 vac 50/60 hz for 1 min vibration resistance *2 malfunction 10 to 55 hz, 1.5 mm double amplitude shock resistance durability of 1.47 n models 1,000 m/s 2 {approx. 100g} max. of 0.49 n models 500 m/s 2 {approx. 50g} max. of 0.25 n models 500 m/s 2 {approx. 50g} max. malfunction *2 of 1.47 n models 300 m/s 2 {approx. 30g} max. of 0.49 n models 200 m/s 2 {approx. 20g} max. of 0.25 n models 200 m/s 2 {approx. 20g} max. durability *3 mechanical 10,000,000 operations min. (60 operations/min) 30,000,000 operations min. (60 operations/min) electrical 50,000 operations min. (30 operations/min) 200,000 operations min. (30 operations/min) degree of protection iec ip40 degree of protection against electric shock class i proof tracking index (pti) 175 ambient operating temperature -25c to + 85c (at ambient humidity of 60% max.) (with no icing or condensation) ambient operating humidity 85% max. (for + 5c to + 35c) weight approx. 1.6g (pin plunger models) ratings note. the above rating values apply under the following test conditions. (1) ambient temperature: 20 2c (2) ambient humidity: 65 5% (3) operating frequency: 30 operations/min approved safety standards models shown in the " list of models " are ul and csa approved models. note. note that heat resistant models are not standard approved models. ul (ul1054) /csa (csa c22.2 no.55) consult your omron sales representative for specific models with vde standa rd approvals. vde (en61058-1) testing conditions: 5e4 (50,000 operations) t85 (0c to 85c) item resistive load model rated voltage ss-10 models 250 vac 10.1 a ss-5 models 125 vac 250 vac 5 a 3 a ss-01 models 125 vac 0.1 a 30 vdc 0.1 a rated voltage model ss-10 ss-5 ss-01 125 vac 250 vac - 10.1 a 5 a 3 a 0.1 a - 30 vdc - - 0.1 a rated voltage model ss-10 ss-5 250 vac 10 a 5 a solder terminals quick connect terminals (#110) pcb terminals 2.9 1.6 0.5 8.8 7.3 19.8 3.2 6.4 6.4 3-1.6 dia. holes 9.5 0.1 2.9 1.6 8.8 7.3 19.8 3.2 2.8 7.1 10.6 3-1.2 dia. holes 9.5 0.1 0.5 2.9 1.6 8.8 7.3 19.8 3.3 3.2 1.2 0.5 0.6 7.0 t=0.5 9.5 0.1 0.5 16.1 0.1 8.8 + 0.15 -0.05 3-1.35~1.5 dia. (1.6) 9.5 0.1 2-2.4 dia. mounting holes or m2.3 screw holes
5 ss subminiature basic switch s s dimensions (unit: mm) and operating characteristics the illustrations and drawings are for solder terminals models. refer to "terminals/appearances" of the previous page for details on models with quick connect terminals (#110) or pcb terminals. note 1. unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. note 2. the operating characteristics are for operation in the a direction ( ). pin plunger ss-10 ss-5 (-f) ss-01 (-e, -f) model operating characteristics ss-10 ss-5 ss-01 SS-5-F ss-01-f ss-01-e operating force of max. releasing force rf min. 1.47 n {150 gf} 0.25 n {25 gf} 1.47 n {150 gf} 0.25 n {25 gf} 0.49 n {50 gf} 0.04 n {4 gf} 0.25 n {25 gf} 0.02 n {2 gf} pretravel pt max. overtravel ot min. movement differential md max. 0.6 mm 0.4 mm 0.12 mm 0.5 mm 0.5 mm 0.1 mm 0.5 mm 0.5 mm 0.1 mm 0.5 mm 0.5 mm 0.1 mm operating position op 8.4 0.5 mm 2.9 op pt 1.6 0.5 8.8 7.3 19.8 3.2 3.2 6.4 6.4 3-1.6 dia. holes 9.5 0.1 2.5 0.07 dia. 2.35 + 0.075 dia. holes -0.05 2.35 + 0.075 -0.05 9.5 10.2 7.5 2 2.5 a 5.1 hinge lever ss-10gl ss-5gl (-f) ss-01gl (-e, -f) 2.9 op fp 1.6 8.8 5.1 7.3 19.8 3.2 3.6 6.4 6.4 3-1.6 dia. holes 9.5 0.1 2.5 0.07 dia. 2.35 + 0.075 dia. holes -0.05 2.35 + 0.075 -0.05 9.5 10.2 14.5 2.5 a t=0.3* * stainless-steel lever 0.5 model operating characteristics ss-10gl ss-5gl ss-01gl ss-5gl-f ss-01gl-f ss-01gl-e operating force of max. releasing force rf min. 0.49 n {50 gf} 0.06 n {6 gf} 0.49 n {50 gf} 0.06 n {6 gf} 0.16 n {16 gf} 0.02 n {2 gf} 0.08 n {8 gf} 0.01 n {1 gf} (reference value) overtravel ot min. movement differential md max. 1.0 mm 1.0 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm free position fp max. operating position op 13.6 mm 8.8 0.8 mm note. the indicated reference values of rf are for cases where the lever weight is not applied to the plunger. c no nc 2.9 op fp 1.6 8.8 5.1 7.3 19.8 3.2 3.6 6.4 6.4 3-1.6 dia. holes 9.5 0.1 2.5 0.07 dia. 2.35 + 0.075 dia. holes -0.05 2.35 + 0.075 -0.05 9.5 10.2 22.6 2.5 a t=0.3* * stainless-steel lever 0.5 long hinge lever ss-10gl111 ss-5gl111 (-f) ss-01gl111 (-e, -f) model operating characteristics ss-10gl111 ss-5gl111 ss-01gl111 ss-5gl111-f ss-01gl111-f ss-01gl111-e operating force of max. releasing force rf min. 0.39 n {40 gf} 0.03 n {3 gf} 0.39 n {40 gf} 0.03 n {3 gf} 0.12 n {12 gf} 0.02 n {2 gf} (reference value) 0.06 n {6 gf} 0.003 n {0.3 gf} (reference value) overtravel ot min. movement differential md max. 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm free position fp max. 16.8 mm operating position op 8.8 1.5 mm 8.8 2 mm note. the indicated reference values of rf are for cases where the lever weight is not applied to the plunger.
6 ss subminiature basic switch s s note 1. unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. note 2. the operating characteristics are for operation in the a direction ( ). simulated roller lever ss-10gl13 ss-5gl13 (-f) ss-01gl13 (-e, -f) 2.9 op fp 1.6 8.8 5.1 7.3 19.8 3.2 6.4 6.4 3-1.6 dia. holes 9.5 0.1 2.5 0.07 dia. 2.35 + 0.075 dia. holes -0.05 2.35 + 0.075 -0.05 9.5 10.2 15.8 2.5 a r1.3 t=0.3* * stainless-steel lever 3.6 0.5 model operating characteristics ss-10gl13 ss-5gl13 ss-01gl13 ss-5gl13-f ss-01gl13-f ss-01gl13-e operating force of max. releasing force rf min. 0.49 n {50 gf} 0.06 n {6 gf} 0.49 n {50 gf} 0.06 n {6 gf} 0.16 n {16 gf} 0.02 n {2 gf} 0.08 n {8 gf} 0.01 n {1 gf} (reference value) overtravel ot min. movement differential md max. 1.0 mm 1.0 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm free position fp max. operating position op 15.5 mm 10.7 0.8 mm note. the indicated reference values of rf are for cases where the lever weight is not applied to the plunger. 2.9 op fp 1.6 8.8 5.1 7.3 19.8 3.2 6.4 6.4 3-1.6 dia. holes 9.5 0.1 2.5 0.07 dia. 2.35 + 0.075 dia. holes -0.05 2.35 + 0.075 -0.05 9.5 10.2 14.5 4.8x3.2 dia. *2 2.5 a t=0.3 * 1 *1. stainless-steel lever *2. polyacetal resin roller 0.5 model operating characteristics ss-10gl2 ss-5gl2 ss-01gl2 ss-5gl2-f ss-01gl2-f ss-01gl2-e operating force of max. releasing force rf min. 0.49 n {50 gf} 0.06 n {6 gf} 0.49 n {50 gf} 0.06 n {6 gf} 0.16 n {16 gf} 0.02 n {2 gf} 0.08 n {8 gf} 0.01 n {1 gf} (reference value) overtravel ot min. movement differential md max. 1.0 mm 1.0 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm free position fp max. operating position op 19.3mm 14.5 0.8mm note. the indicated reference values of rf are for cases where the lever weight is not applied to the plunger. hinge roller lever ss-10gl2 ss-5gl2 (-f) ss-01gl2 (-e, -f)
7 ss subminiature basic switch s s precautions please refer to "common precautions" for correct use. soldering ? complete the soldering at the iron tip temperature below 350c within 5 seconds, and do not apply any external force for 1 minute after soldering. soldering at an excessively high temperature or soldering for more than 5 seconds may deteriorate the characteristics of the switch. ? be sure to apply only the minimum required amount of flux. switch may have contact failures if flux intrudes into the interior of the switch. ? if the pcb terminal models are soldered in the solder bath, flux will permeate inside the switch and cause contact failure. therefore, manually solder the pcb terminal. mounting ? use m2.3 mounting screw with plane washers or spring washers to securely mount the switch. tighten the screws to a torque of 0.23 to 0.26 nm {2.3 to 2.7 kgfcm}. ? mount the switch onto a flat surface. mounting on an uneven surface may cause deformation of the switch, resulting in faulty operation or breakage in the housing. using micro loads using a model for ordinary loads to open or close the contact of a micro load circuit may result in faulty contact. use models that operate in the following range. however, even when using micro load models within the following operating range, if inrush current occurs when the contact is opened or closed, it may increase the contact wear and so decrease durability. therefore, insert a contact protection circuit where necessary. the n-level reference value applies for the minimum applicable load. this value indicates the malfunction reference level for the reliability level of 60% ( 60 ). (jis c5003) the equation, 60 =0.510 -6 /operation indicates that the estimated malfunction rate is less than operations with a reliability level of 60%. cautions correct use 1 2,000,000 30 24 12 5 0 1 10 100 1,000 current (ma) 0.1 1 ma operating range for general-load models ss-5 ss-10 operating range for micro-load model ss-01 26 ma 0.16ma 100 ma 160ma 100 ma voltage (v)
8 ss subminiature basic switch s s ? application examples provided in this document are for reference only. in actual applications, confirm equipment functions and safety before using the product. ? consult your omron representative before using the product under conditions which are not described in the manual or applying t he product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other sys tems or equipment that may have a serious influence on lives and property if used improperly. make sure that the ratings and performance characteristics of the product p rovide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. omron corporation electronic and mechanical components company contact: www.omron.com/ecb cat. no.b032-e1-13 0812(0207)(o) note: do not use this document to operate the unit.
|
